Shopping Cart
0 items
 
Bestsellers
ELITE-GUARD 20Litre ELITE-GUARD 20Litre
$599.00 $475.00
ELITE-SHIELD 15 WB  20Litre ELITE-SHIELD 15 WB 20Litre
$999.00 $725.00
ENHANCER SS WET LOOK  1 Litre ENHANCER SS WET LOOK 1 Litre
$69.00 $65.00
CONCRETE SEALER - 20 Litre CONCRETE SEALER - 20 Litre
$199.00 $159.00
 

ELITE-SHIELD 15 WB 20Litre

ELITE-SHIELD 15 WB  20Litre
Click to enlarge
Price: $999.00 $725.00
Availability: In Stock
Model: ELITE-SHIELD-20L
Average Rating: 5 out of 5 Stars!

ELITE-SHIELD - PENETRATING SEALER

  • Clear Natural Look.
FOR POROUS & HARD TILES / PAVERS

ELITE-SHIELD Offers Maximum water and stain protection.

  • Latest Waterbased Technology.
  • Fast Application with 2 coast as fast as 5-20min Apart.
  • Natural Look
  • New Fast Curing Formula Protects Faster.
  • Can be applied whilst stone is still damp
  • Premium long lasting protection against oil and water-based contaminants.
  • Advanced Fluro-bond technology
  • Protects natural stone such as granite, sandstone, travertine, limestone, bluestone along with tiles, pavers and concrete.
  • Suitable for interior and exterior applications.
  • Ideal for food areas
  • Does not alter the coefficient of friction or slip factor.
  • Enables easier removal of dirt, grease, chewing gum, wine, coffee, graffiti.
  • Eliminates the occurrence of Efflorescence.
  • Makes cleaning easier, controls mould & mildew growth,
  • Retains a natural look.
  • Breathable coating allows water vapor to escape.
  • Pen-E- Shield will last up to 15 years or longer dependent on application, maintenance and weather conditions.
  • Water based non flammable, No odour, Non film forming will not flake or peel
  • 2 coats.
ELITE-SHIELD competes with reputable products like Aquamix Sealers choice Gold 19Litres for $1500 or Drytreat Stain-Proof 18.9Litres for $1195.
 
Proudly Elite Coatings ELITE-SHIELD is Australian made. 

Approx coverage m2 per litre per coat

 

Application of Waterbased ELITE-SHIELD - ELITE-GUARD - ELITE-SEAL.

  • Protect any adjacent areas by masking to avoid splashes or overspray onto surfaces not intended to be treated.
  • Surface to be treated should be clean but can be damp.
  • Apply sealer liberally by spray, lambs wool applicator, roller or brush.
  • Leave for 5-20 minutes then reapply a second coat whilst still wet.
  • Wipe of excess sealer on top with a clean cloth after 5mins.
  • Allow to dry, water repellency will be evident immediately the surface appears dry, full curing will take 24 hours.
  • Temperature of Tile, Paver or Concrete should be between 10 - 29 Degrees Celsius.
  • Wash equipment in water as soon as finished.

In all applications wiping off any excess sealer on top of the surface is required.

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

There are no additional images for this product.