Shopping Cart
0 items
 
Bestsellers
ELITE-GUARD 20Litre ELITE-GUARD 20Litre
$599.00 $475.00
ELITE-SHIELD 15 WB  20Litre ELITE-SHIELD 15 WB 20Litre
$999.00 $725.00
ENHANCER SS WET LOOK  1 Litre ENHANCER SS WET LOOK 1 Litre
$69.00 $65.00
CONCRETE SEALER - 20 Litre CONCRETE SEALER - 20 Litre
$199.00 $150.00
 

ENHANCER SS WET LOOK 1 Litre

ENHANCER SS WET LOOK  1 Litre
Click to enlarge
Price: $69.00 $65.00
Availability: In Stock
Model: ELITE-SSE-1L
Average Rating: Not Rated

SS ENHANCER 1Litre

  • Solvent based Penetrating Sealer
  • SS Enhancer is a specially formulated solvent based stone enhancer designed to darken and highlight soft and hard stone.
  • Enhance Granite, Bluestone, Marble, Travertine, Limestone, Sandstone and Slate.
  • SS Enhancer provides resistance to water and staining.
  • SS Enhancer rejuvenates the colour and appearance of worn and weathered stone giving it a new life.
  • SS Enhancer can also be used to enhance coloured concrete, masonry and bricks without altering the surface characteristics.
  • The darker the colour the more enhancement achieved.
  • 2 coats

Approx coverage m2 per litre per coat.


Enhancer SS Wet Look - 15Litre

Caution: the colour change is irreversible and will not fade so care must be used before application and testing a small inconspicuous area is recommended where possible to ensure the final result is to expectation and to determine how many coats will give the desired end result..


APPLICATION

  • Protect any adjacent areas by masking to avoid splashes or overspray onto surfaces not intended to be treated
  • The surface must be clean and dry
  • Apply liberal coating of Enhance SS using brush, roller, mop or low pressure spray
  • Give the whole surface a “Wet” look.
  • Leave the coating to penetrate the surface for 5-10mins, dependant on drying conditions
  • *Wipe off any excess with clean cloth or mop after applying first and second coat.
  • The second coat of Enhancer SS can be applied whenh 1st coat is dried.
  • Tiles will take Approx 24-48 hours to fully cure dependant on weather.
  • Temperature of Tile, Paver or Concrete should be between 10 - 29 Degrees Celsius.

Pictures of colours are for illustrative purposes only.

Colours may vary from how they appear on our website and should be taken as a guide only.

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

ENHANCER SS WET LOOK  1 Litre
Click to enlarge
ENHANCER SS WET LOOK  1 Litre
Click to enlarge
ENHANCER SS WET LOOK  1 Litre
Click to enlarge