Shopping Cart
0 items
 
Bestsellers
ELITE-GUARD 20Litre ELITE-GUARD 20Litre
$599.00 $475.00
ELITE-SHIELD 15 WB  20Litre ELITE-SHIELD 15 WB 20Litre
$999.00 $725.00
ENHANCER SS WET LOOK  1 Litre ENHANCER SS WET LOOK 1 Litre
$69.00 $65.00
CONCRETE SEALER - 20 Litre CONCRETE SEALER - 20 Litre
$199.00 $150.00
 

BLUESTONE COLOUR PACK 21Litre

BLUESTONE COLOUR PACK 21Litre
Click to enlarge
Price: $260.00 $199.00
Availability: In Stock
Model: ELITE-BLUESTONE-PK-21
Average Rating: Not Rated

Pack Contents;

 

20Litre Clear gloss sealer

 

1Litre of Bluestone Tint.

 

 

Elite Concrete Sealer

Residential driveways, patios, warehouses and light industrial buildings will benefit from applying concrete sealer.
Concrete sealer is excellent for interior applications with no solvent fumes and does not have the flammable hazards of conventional solvent based products.
By applying 2 coats of concrete sealer, a colour enhancement not usually seen with water based sealers gives an attractive lift especially to coloured concrete surfaces.

FEATURES
  • Excellent for Interior and Exterior coating.
  • Waterbased, easy to use.
  • No solvent fumes or flammable hazards.
  • Low VOC.
  • Can be sprayed, brushed or applied by roller.
  • Quick drying.
  • Fast water resistance – within 2 hours.
  • Gloss finish.
  • Enhances surfaces.
  • Hot tyre resistant.
  • Chemical resistant – oils, greases, alkali.
  • Resists discoloration from dirt and spills.
  • UV resistant – non yellowing.
  • Provides a dust free surface.
  • Coverage: 8-10sq. metres per litre approx per coat dependant on porosity of concrete or pavers.
 
CLEANING TIP
Degreaser for making cleaning easier is available in the cleaning section.

 

 

 

 

Application of Product

  •  Apply to dry or slightly damp area, dust free concrete surfaces only, caution On new concrete, best to allow 21 days curing prior to sealing.
  • Two coats recommended for optimum effect.
  • Can be low pressure sprayed, brushed or applied by good quality roller.
  • Application must not be too thick as excessive build up may cause the Coating to appear milky.
  • Allow 24-48 hours to cure.
  • Do not apply when temperature of concrete is below 10ºC.
  • Temperature of Tile, paver or concrete should be between 10-29 Degrees Celsius.Do not apply if rain is imminent.
  • Pedestrian traffic allowed after 24 hours.
  • Allow 5-7 days before vehicular traffic access.
  • Clean up equipment with water immediately after use.
  • Allow full cure of Aquaseal before performing any cutting. 5-7 days minimum.
  • Temperature of Concrete or area should be between 10 - 29 Degrees Celsius.
  • Two thin coats will last longer than thick coats.

GRIP ADDITIVE ALSO AVAILABLE @ $25.00

Cleaning of equipment

 

Clean tools with water before material dries



Pictures of colours are for illustrative purposes only.

 

 

Colours may vary from how they appear on our website and should be taken as a guide only. 

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

BLUESTONE COLOUR PACK 21Litre
Click to enlarge
BLUESTONE COLOUR PACK 21Litre
Click to enlarge
BLUESTONE COLOUR PACK 21Litre
Click to enlarge
BLUESTONE COLOUR PACK 21Litre
Click to enlarge
BLUESTONE COLOUR PACK 21Litre
Click to enlarge