Shopping Cart
0 items
 
Bestsellers
ELITE-GUARD 20Litre ELITE-GUARD 20Litre
$599.00 $475.00
ELITE-SHIELD 15 WB  20Litre ELITE-SHIELD 15 WB 20Litre
$999.00 $725.00
ENHANCER SS WET LOOK  1 Litre ENHANCER SS WET LOOK 1 Litre
$69.00 $65.00
ELITE-PRE-SEAL 20Litre ELITE-PRE-SEAL 20Litre
$399.00 $359.00
 

SEALER RESIDUE REMOVER 1 Litre

SEALER RESIDUE REMOVER 1 Litre
Click to enlarge
Price: $75.00 $65.00
Availability: In Stock
Model: ELITE-SRR1L
Average Rating: Not Rated

Sealer Residue Remover

REMOVES EXCESS SEALER FROM SURFACE

Product Description

Sealer Residue Remover is a non-flammable solvent and surfactant blend designed to remove the sticky or milky film off stone or concrete surfaces from an excess application of Penetrating/Impregnating Sealer.

Suitable Tile Types

All non-glazed tiles including sandstone, travertine, concrete pavers, bluestone and blocks.

Key Features

·  Low Odour     · Low Toxicity

·  Non Carcinogenic   ·  Water rinse-able

·  Non-Caustic   · Low Evaporation rate

Application:

·        Spray or brush Sealer Residue Remover on to the sticky surface a minimum of 24 hours after application of the penetrating sealer.

·        Ensure the Sealer Residue Remover is only applied to stone or concrete, it can affect painted and plastic surfaces if allowed to come in contact.

·        Leave for 2-3 minutes to attack and lift the sticky film

·        The surface can then be power washed, rubbed with a clean cloth or brushed with a stiff nylon bristle brush to remove the sticky excess enhancer.

·        On smooth tiles a final wipe over using a mist of Neutral Cleaner and a clean cloth gives an excellent finish.

·        Temperature of Tile, Paver or Concrete should not be below 10 Degrees Celsius.

Warning

Allow the Penetrating Sealer a minimum of 24 hours to dry and bond to the substrate before using the Sealer Residue Remover as some of the sealer can be removed whilst still wet.  

For SS Enhancer, when dry the Remover will have no effect on the colour. 

Storage

  • Close container tightly after each use
  • Store in original container only
  • Store in and use in temperatures between (10° C to 29° C)


Health Precautions

MAY BE HARMFULL IF SWALLOWED. MAY IRRITATE EYES AND SKIN. Wear skin and eye protection. If in eyes, flush with water for at least 15 minutes. If on skin, wash with soap and water. If irritation persists, seek medical attention. If swallowed, DO NOT induce vomiting. Seek medical attention.

 

Please Note: This data sheet is to provide information on the product based on current knowledge. It does not constitute a guarantee and we recommend that testing should be undertaken to ensure that the final result is satisfactory for the intended application. The quality of the product is guaranteed under our General Conditions of Sale.

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

There are no additional images for this product.