Shopping Cart
0 items
 
Bestsellers
ELITE-GUARD 20Litre ELITE-GUARD 20Litre
$599.00 $475.00
ELITE-SHIELD 15 WB  20Litre ELITE-SHIELD 15 WB 20Litre
$999.00 $799.00
CONCRETE SEALER GLOSS - 20 L CONCRETE SEALER GLOSS - 20 L
$199.00 $169.00
ELITE-GUARD       5Litre ELITE-GUARD 5Litre
$229.00 $159.00
ELITE-SHIELD 15 WB 1Litre ELITE-SHIELD 15 WB 1Litre
$90.00 $65.00
ELITE-PRE-SEAL 20Litre ELITE-PRE-SEAL 20Litre
$399.00 $359.00
ENHANCER SS - 5Litre ENHANCER SS - 5Litre
$299.00 $275.00
 

ELITE-SHIELD 15 WB 1Litre

ELITE-SHIELD 15 WB 1Litre
Click to enlarge
Price: $90.00 $65.00
Availability: In Stock
Model: ELITE-SHIELD-1L
Average Rating: Not Rated

ELITE-SHIELD - PENETRATING SEALER

*Clear Natural Look.

FOR POROUS & HARD TILES / PAVERS

 

ELITE-SHIELD Offers Maximum water and stain protection.

Latest Waterbased Technology.
Fast Application with 2 coast as fast as 5-20min Apart.
New Fast Curing Formula Protects Faster.
Can be applied whilst stone is still damp
Premium long lasting protection against oil and water-based contaminants.
Advanced Fluro-bond technology
Protects natural stone such as granite, sandstone, travertine, limestone, bluestone along with tiles, pavers and concrete.
Suitable for interior and exterior applications.
Ideal for food areas
Does not alter the coefficient of friction or slip factor.
Enables easier removal of dirt, grease, chewing gum, wine, coffee, graffiti.
Eliminates the occurrence of Efflorescence.
Makes cleaning easier, controls mould & mildew growth,
Retains a natural look.
Breathable coating allows water vapor to escape.
ELITE-SHIELD will last up to 15 years or longer dependent on application, maintenance and weather conditions.
Water based non flammable, No odour, Non film forming will not flake or peel
2 coats required.
 
 
ELITE-SHIELD competes with reputable products like Aquamix Sealers choice Gold 19Litres for $1500 or Drytreat Stain-Proof 18.9Litres for $1195.
 
Proudly Elite Coatings ELITE-SHIELD is Australian made. 
 
Approx coverage m2 per litre per coat

Application

Surface to be treated should be clean but can be damp.

Apply ELITE-SHIELD liberally by spray, lambs wool applicator, roller or brush.

Leave for 5-20 minutes then reapply a second coat whilst still wet.

Wipe of excess sealer on top with a clean cloth after 5mins.

Allow to dry, water repellency will be evident immediately the surface appears dry, full curing will take 24 hours.

Temperature of Tile, Paver or Concrete should be between 10 - 29 Degrees Celsius.


Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

ELITE-SHIELD 15 WB 1Litre
Click to enlarge