Shopping Cart
0 items
 
Bestsellers
ELITE-GUARD 20Litre ELITE-GUARD 20Litre
$599.00 $475.00
ELITE-SHIELD 15 WB  20Litre ELITE-SHIELD 15 WB 20Litre
$999.00 $799.00
CONCRETE SEALER GLOSS - 20 L CONCRETE SEALER GLOSS - 20 L
$199.00 $169.00
ELITE-GUARD       5Litre ELITE-GUARD 5Litre
$229.00 $159.00
ELITE-SHIELD 15 WB 1Litre ELITE-SHIELD 15 WB 1Litre
$90.00 $65.00
ELITE-PRE-SEAL 20Litre ELITE-PRE-SEAL 20Litre
$399.00 $359.00
ENHANCER SS - 5Litre ENHANCER SS - 5Litre
$299.00 $275.00
 

ENHANCER SS - 5Litre

ENHANCER SS - 5Litre
Click to enlarge
Price: $299.00 $275.00
Availability: In Stock
Model: ELITE-SSE-5L
Average Rating: 5 out of 5 Stars!

SS ENHANCER 5Litre 

  • Solvent based Penetrating Sealer
  • Specially formulated solvent based stone enhancer designed to darken and highlight soft and hard stone.
  • The darker the colour the more enhancement achieved.
  • Enhance Granite, Bluestone, Marble, Travertine, Limestone, Sandstone and Slate.
  • Provides resistance to water and staining.
  • Rejuvenates the colour and appearance of worn and weathered stone giving it a new life.
  • Enhancer can also be used to enhance coloured concrete, masonry and bricks without altering the surface characteristics.
  • 2 coats

Approx coverage m2 per litre per coat.

 

Enhancer SS Wet Look - 15Litre

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Caution: the colour change is irreversible and will not fade so care must be used before application and testing a small inconspicuous area is always recommended to ensure the final result is to expectation and to determine how many coats will give the desired end result..


APPLICATION

  • Protect any adjacent areas by masking to avoid splashes or overspray onto surfaces not intended to be treated
  • The surface must be clean and dry
  • Apply liberal coating of Enhance SS using brush, roller, mop or low pressure spray
  • Give the whole surface a “Wet” look to ensure sufficient product is applied.
  • Leave the coating to penetrate the surface for 5-10mins, dependant on drying conditions
  • Wipe off any excess with clean cloth or mop after applying first and second coat.
  • The second coat of Enhancer SS can be applied when 1st coat is dried.
  • Tiles will take Approx 24-48 hours to fully cure dependant on weather.
  • Temperature of Tile, Paver or Concrete should be between 10 - 29 Degrees Celsius.


 

Photo of Black Granite drieway displayed.

Pictures of colours are for illustrative purposes only.

Colours may vary from how they appear on our website and should be taken as a guide only.

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

ENHANCER SS - 5Litre
Click to enlarge
ENHANCER SS - 5Litre
Click to enlarge
ENHANCER SS - 5Litre
Click to enlarge