Shopping Cart
0 items
 
Bestsellers
ELITE-GUARD 20Litre ELITE-GUARD 20Litre
$599.00 $475.00
ELITE-SHIELD 15 WB  20Litre ELITE-SHIELD 15 WB 20Litre
$999.00 $799.00
CONCRETE SEALER GLOSS - 20 L CONCRETE SEALER GLOSS - 20 L
$199.00 $169.00
ELITE-GUARD       5Litre ELITE-GUARD 5Litre
$229.00 $159.00
ELITE-SHIELD 15 WB 1Litre ELITE-SHIELD 15 WB 1Litre
$90.00 $65.00
ELITE-PRE-SEAL 20Litre ELITE-PRE-SEAL 20Litre
$399.00 $359.00
ENHANCER SS - 5Litre ENHANCER SS - 5Litre
$299.00 $275.00
 

ELITE-SEAL 1 litre

ELITE-SEAL 1 litre
Click to enlarge
Price: $79.00 $59.00
Availability: In Stock
Model: ELITE-SEAL 1L
Average Rating: Not Rated

ELITE-SEAL offers water and stain protection.

*Waterbased Low voc and no toxic fumes.
*Fast application with coats 5-20min apart.
*Ideal for around pool areas.
*Excellent results on porous tiles or pavers.

ELITE-SEAL 
PENETRATING SEALER NATURAL LOOK - 5Litre
*Can be applied while stone is still damp after cleaning.
*Protects Concrete, Terracotta, Pavers, Sandstone, Limestone, Bluestone, Travertine, Pool areas and other natural rock against water damage and staining.
*Enables easier removal of dirt, grease, chewing gum, wine, coffee, graffiti.
*Eliminates the occurrence of Efflorescence.
*Reduces Moss, mould and algae growth.
*Reduces corrosion attack on steel reinforcing.
*Retains a natural look.
*Breathable, allows water vapor to escape.
*Food Safe
*Alkali resistant
*Salt barrier, ideal around saltwater pools or marinas.

Elite-Seal will last up to 5 years or longer dependent on application, maintenance and weather conditions.
2 coats

Coverage - 7-14sq.metres Approx per coat.


Also Available in Sizes 15Litre, 20Litre , 25Litre.

Application of Waterbased Elite-Seal.

  • Protect any adjacent areas by masking to avoid splashes or overspray onto surfaces not intended to be treated.
  • Surface to be treated should be clean but can be damp.
  • Apply sealer liberally by spray, lambs wool applicator, roller or brush.
  • Leave for 5-20 minutes then reapply a second coat whilst still wet.
  • Wipe of excess sealer on top with a clean cloth after 5mins.
  • Allow to dry, water repellency will be evident immediately the surface appears dry, full curing will take 24 hours.
  • Temperature of Tile, Paver or Concrete should be between 10 - 29 Degrees Celsius.
  • Wash equipment in water as soon as finished.

In all applications wiping off any excess sealer on top of the surface is required.

If a more resistant sealer is required to repel oils, wine, coffee and stains. "High Entertaining areas" Penetrating Sealer Peneshield should be used.
Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

ELITE-SEAL 1 litre
Click to enlarge