Shopping Cart
0 items
 
Bestsellers
ELITE-GUARD 20Litre ELITE-GUARD 20Litre
$599.00 $475.00
ELITE-SHIELD 15 WB  20Litre ELITE-SHIELD 15 WB 20Litre
$999.00 $799.00
CONCRETE SEALER GLOSS - 20 L CONCRETE SEALER GLOSS - 20 L
$199.00 $169.00
ELITE-GUARD       5Litre ELITE-GUARD 5Litre
$229.00 $159.00
ELITE-SHIELD 15 WB 1Litre ELITE-SHIELD 15 WB 1Litre
$90.00 $65.00
ELITE-PRE-SEAL 20Litre ELITE-PRE-SEAL 20Litre
$399.00 $359.00
ENHANCER SS - 5Litre ENHANCER SS - 5Litre
$299.00 $275.00
 

2 PACK URETHANE COLOUR KIT MID GREY - 21L

2 PACK URETHANE COLOUR KIT MID GREY - 21L
Click to enlarge
Price: $599.00 $550.00
Availability: In Stock
Model: ELITE-2PACK-21L-MG
Average Rating: Not Rated

Polyurethane - 2 pack Clear Waterbased kit Colour Pack Mid Grey - 21Litre


Pack Contents;


16 Litre Clear gloss sealer.


4 Litre Hardener.

 

1 Litre Mid Grey Tint

Polyurethane 2 Pack when cured forms a glossy, durable and chemically resistant surface.
ideal for use as a replacement for epoxy coatings especially on polished or concrete floors.
Used for Flake floor applications requiring a super shine.
Often used in areas where solvent products cannot be used.

Protection from chemicals, oils, acid and solvents.
Low VOC product
UV stable formula

  • High Gloss Finish
  • No Dangerous solvent Fumes
  • Will not go cloudy or yellow when water is on for long periods
  • Great resistance to hot rubber tyres.
  • Fast curing time.
  • Hard wearing.
  • User friendly.
  • Long pot life after mixing.
  • 4 hour cure time.
  • Water wash up

Recommended for;
Warehouse floors.
Car Park.
Shop floors.
Garage floors.
High traffic areas.
 
ALSO AVAILABLE IN MATT FINSH.


Mixing

Mix 4 Parts of Sealer with 1 Part of Hardener.

Mix thoroughly using a power drill mixing attachment. Mix for 2mins ensuring sides are well mixed. 


Application
Polyurethane should be applied with a lambswool applicator or 10mm nap roller or low pressure sprayer.
For roller and brush application, work the surface enough to ensure thorough wetting of the surface and to eliminate air bubbles.
Allow a minimum of 4 hours between coats or when the first coat is touch dry.

CLEAN UP

Wash equipment with water immediately as the Polyurethane 2 Pack is water resistant when cured.
 
 

Technical Info

Description

Solids Content

35%

Shelf Life

6 Months un-opened 

Tack Free Time

4 Hours

 

 

Re-Coat

24 Hours

Initial Hardening

24 Hours @ 25 Degrees

 

 

Full Chemical Cure

7 Days @ 25 Degrees

Film Thickness

Varies depending on process.

Coverage Rate

8-10m2 per coat approx, depending on substrate 

conditions.

As a concrete sealer two coats are normally 

required.  

Serviceable Life

5 - 10 Years

 
Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

2 PACK URETHANE COLOUR KIT MID GREY - 21L
Click to enlarge